What is the method of cutting sponge with special-shaped sponge cutting machine? Sponge cutting machine company will introduce to you.

About the special-shaped sponge cutting machine, also known as the sponge computer profiling cutting machine, there are manual and automatic points. The content of this chapter will briefly describe the method of cutting sponge with the CNC special-shaped sponge cutting machine (automatic) developed and produced by our company.

Vibration knife machine and cycle knife machine, the operation is basically the same, but the working principle is different. Preparation before cutting:

First of all, it is necessary to confirm that the working platform and body of the equipment are clean and free of large debris. The installation of the machine is complete and the power supply is connected normally. Note that other personnel should not approach the cutting site.

Secondly, place the sponge material we prepared in advance on a suitable position on the work surface (easy processing position, near the middle).

Third, turn on the device and call up the sponge graphics to be cut on the computer. If it is a newly developed product, you need to create a new CAD graphics. A skilled operator can draw a simple special-shaped sponge diagram in 10 minutes. Combined with the processed sponge material, after setting it according to the required graphics and size, use the remote control to advance the sponge to a suitable cutting position.

Fourth, to ensure that the machine sound is normal and there is no abnormality in the work, the cutting work can be carried out.

The above is the cutting method of the CNC sponge cutting machine, I hope it will help you to understand the method of processing special-shaped sponge.